<< Click to Display Table of Contents >> Navigation:  Pages > Project Pages > Duct Design > Select Fitting Group

Open this page by clicking the Add Fitting button on the Duct Data page.

Select Button:  Opens the Select Fitting page letting you pick from all the fittings in that group.

Group Name:  Shows the description of the group from Manual D.

Reference Velocity:  Shows the duct velocity used as a reference when the calculations are determining the equivalent length and pressure loss of the duct, as described in the Equivalent Length of Fitting topic.

Reference L/100:  Shows the duct static pressure loss per 100 ft. used as a reference when the calculations are determining the equivalent length and pressure loss of the duct, as described in the Equivalent Length of Fitting topic.